Air tool CFM chart
Consumption at 90 PSI, with the duty cycle that decides what the compressor has to sustain. Nameplate CFM alone tells you almost nothing about what machine you need.
| Tool | CFM at rated PSI | PSI | Duty cycle | Sustained | Use |
|---|---|---|---|---|---|
| Impact wrench, 1/2 in | 4.5 | 90 | 20% | 0.9 | Intermittent |
| Impact wrench, 3/8 in | 3.5 | 90 | 20% | 0.7 | Intermittent |
| Air ratchet, 3/8 in | 3.0 | 90 | 25% | 0.8 | Intermittent |
| Die grinder | 5.0 | 90 | 60% | 5.0 | Continuous |
| Cut-off tool | 4.0 | 90 | 50% | 4.0 | Continuous |
| Random orbital sander | 6.0 | 90 | 90% | 6.0 | Continuous |
| Dual action sander | 11.0 | 90 | 90% | 11.0 | Continuous |
| HVLP spray gun | 9.0 | 40 | 70% | 9.0 | Continuous |
| Blow gun | 3.0 | 90 | 10% | 0.3 | Intermittent |
| Brad nailer | 0.3 | 90 | 5% | 0.0 | Intermittent |
| Framing nailer | 2.2 | 100 | 5% | 0.1 | Intermittent |
| Tyre inflator | 2.0 | 90 | 15% | 0.3 | Intermittent |
| Air hammer | 4.0 | 90 | 30% | 1.2 | Intermittent |
| Sandblaster, small | 12.0 | 90 | 90% | 12.0 | Continuous |
Sustained demand for an intermittent tool is nameplate times duty cycle. For a continuous tool it is the full nameplate figure, because there is no idle time for the tank to recover in. The sizing method sets out how the duty cycles are applied.
Compressor needed for each tool on its own
Including the standard 30 percent margin. To combine several tools, work out the demand from your tools in the calculator; for whole jobs with a tank size, see the compressor sizing chart.
| Tool | Required SCFM | Compressor |
|---|---|---|
| Impact wrench, 1/2 in | 1.2 | 2.6 SCFM |
| Impact wrench, 3/8 in | 0.9 | 2.6 SCFM |
| Air ratchet, 3/8 in | 1.0 | 2.6 SCFM |
| Die grinder | 6.5 | 7.8 SCFM |
| Cut-off tool | 5.2 | 6.4 SCFM |
| Random orbital sander | 7.8 | 7.8 SCFM |
| Dual action sander | 14.3 | 17.5 SCFM |
| HVLP spray gun | 11.7 | 14 SCFM |
| Blow gun | 0.4 | 2.6 SCFM |
| Brad nailer | 0.0 | 2.6 SCFM |
| Framing nailer | 0.1 | 2.6 SCFM |
| Tyre inflator | 0.4 | 2.6 SCFM |
| Air hammer | 1.6 | 2.6 SCFM |
| Sandblaster, small | 15.6 | 17.5 SCFM |
Read your own tool's plate
These are class averages and individual tools vary a great deal. Manufacturers also publish consumption differently: some quote average use, some continuous, and a few quote the figure at a pressure other than 90 PSI, which converts to its 90 PSI equivalent by absolute pressure, as SCFM vs CFM explains. Where it matters, the number on your tool wins over the number here.
The guides work through real jobs, from running an impact wrench to two framing nailers on one hose, and the continuous ones, such as a full respray.