CFMCalc

Air compressor sizing chart

Matched to the work rather than to the tool count. The jobs are ordered by how hard they are on a compressor, which is not the same as how hard they are on you.

For your own mix of tools rather than a typical job, the calculator works out what size air compressor you need.

Check which CFM a listing is quoting. Displacement CFM is the theoretical swept volume of the pump, and a single-stage compressor delivers only about 70 percent of it. A machine advertised at 7.3 CFM displacement is the same machine as one honestly rated 5.1 SCFM at 90 PSI. How to tell them apart.

By job

Sustained demand and the compressor it implies, including margin
JobSustained CFMWith marginCompressorTank
Trim and brad nailing0.00.02.6 SCFM6 gal
Framing0.10.12.6 SCFM20 gal
Tyres and blowing down0.60.82.6 SCFM20 gal
General automotive1.72.12.6 SCFM30 gal
Cutting and grinding9.011.714 SCFM60 gal
Bodywork sanding11.014.317.5 SCFM60 gal
Spray painting, HVLP9.011.714 SCFM60 gal
Sandblasting12.015.617.5 SCFM80 gal

Tank sizes are conventional pairings rather than calculated minimums: a small tank with an adequate pump works, it simply cycles more often.

What each machine can sustain

Compressor output against the tools it will and will not keep up with
SCFM at 90 PSIAt 40 PSISustains
2.65.08 of 14 tools, up to impact wrench, 1/2 in
3.56.78 of 14 tools, up to impact wrench, 1/2 in
4.07.78 of 14 tools, up to impact wrench, 1/2 in
5.19.88 of 14 tools, up to impact wrench, 1/2 in
6.412.39 of 14 tools, up to impact wrench, 1/2 in
7.814.911 of 14 tools, up to random orbital sander
10.520.111 of 14 tools, up to random orbital sander
14.026.812 of 14 tools, up to hvlp spray gun
17.533.514 of 14 tools, up to sandblaster, small
24.045.914 of 14 tools, up to sandblaster, small

Each tool's own figure is in the CFM chart for air tools and duty cycles. Several jobs have worked answers of their own: what a blast cabinet needs, the compressor to paint a car, breaking lug nuts loose, and how to clear an irrigation zone with a small machine.

Frequently asked questions

What size air compressor for a home garage?
For tyres, blowing down and occasional impact work, a small machine around 3.5 to 5.1 SCFM with a 20 to 30 gallon tank is ample. The moment sanding or grinding enters the picture the requirement roughly triples, because those tools run continuously.
What size compressor do I need for sandblasting?
More than most home compressors provide. Even a small blaster draws around 12 CFM continuously, which with margin is about 15.6 SCFM. Blasting is the most demanding common use of compressed air.
Can a small compressor run a spray gun?
An HVLP gun draws about 9 CFM but at 40 PSI rather than 90, and a compressor delivers more air at lower pressure. It is still a continuous draw, so it needs a machine that can sustain it rather than a large tank.

Compressor size by job